Cookieless hit trackers

Automotive toolmaker standardises on Delcam’s PowerINSPECT across all devices

Estimated reading time 5 minutes

Over the past five years, German automotive toolmaker Konrad Schäfer Modell und Formenbau has switched all its static and portable CMMs, as well as its hand scanners, to Delcam’s PowerINSPECT inspection software.  The results of standardising on a single software have included lower training expenses, greater staff flexibility and perfect CAD compatibility.

Caption: German automotive toolmaker Konrad Schäfer Modell und Formenbau uses PowerINSPECT on all its measuring equipment

Konrad Schaefer PowerINSPECT user

The company’s roots in manufacturing models date back 110 years, originally in Muehlhausen, where Konrad Schäfer GmbH now has an additional production site.  “We see ourselves as one of the leading manufacturers of design and data control models, inspection and function cubing, and control gauges for the European automotive industry,” explained Jörg Große-Beilage, head of the modelmaking department, which has been based in Osnabrueck since 1962.


Additional activities include models for vehicle interiors and prototypes for vehicle lights, as well as jigs and moulds for aerospace carbon fibre composites.


Konrad Schäfer GmbH transforms customers’ ideas into reality – five to ten years before they are ready for batch production – with the help of innovative approaches to prototyping, the newest CAD, CAM and metrology technologies, and a modern machine shop.  Herr Große-Beilage also proudly pointed out that technical skill is still a crucial part of the organisation’s philosophy, something that wouldn’t be possible without motivated and well-trained staff.


At nearly every workstation, there is a CMM, either a stationary manual or CNC CMM, or a portable measuring arm.  The range of measuring machines are of different ages and from Mora, Zett Mess and Stiefelmayer, while the portable arms are from FARO.


“Metrology is an important part of our core business,” says Herr Große-Beilage, one of the reasons Konrad Schäfer GmbH continually invests in this area; not only in machines but also in staff training.  “Our target continues to be that both measurement engineers and model builders know how to use our metrology systems”.  That was also one of the reasons why Konrad Schäfer GmbH started to convert their whole range of metrology machines to a universal software.


A wide range of solutions from different companies was reviewed as part of the selection and decision-making process, “but in the end PowerINSPECT convinced us the most.”


“The decision to purchase PowerINSPECT was absolutely spot on, even from today’s perspective,” says Herr Große-Beilage.  On one hand this is because of the good CAD compatibility.  Components in all CAD file formats can be inspected with PowerINSPECT, something that was particularly important for Konrad Schäfer GmbH.


In addition to the extensive feature set and the support from Delcam, the user-friendly interface was a key factor for Herr Große-Beilage and his team.  The CAD File Manager in PowerINSPECT is just one example; this makes it easy to manage component groups. The decision was also easy because PowerINSPECT offered by far the best price-performance ratio.


Konrad Schäfer GmbH currently uses 16 licenses of PowerINSPECT, which have been purchased progressively.  At the start, in 2009, the company purchased two licenses and contracted to buy four additional licenses in each subsequent year.


Portable coordinate metrology is becoming increasingly popular at Konrad Schäfer GmbH.   Five Faro Gauge arms are already used, all supported by PowerINSPECT.  “Manual measuring arms have the advantage that I can measure quicker than with a stationary measuring machine because I can just measure one zero point and then inspect everything else from top to bottom without adjusting anything,” explained Herr Große-Beilage. “But because I’m limited by the part size, the movable stand measuring machine is definitely better suited to a whole car”.


Christian Wollbrick, a metrologist who works daily with the software, confirmed that PowerINSPECT’s ease-of-use means that even untrained staff can get started immediately.  “Elements can be interactively selected in the CAD view, for example,” he said.  “This makes inspection programming significantly easier and quicker, something that is really useful when you just work with the system from time-to-time.”


Moreover, the ability to define a critical measurement point in advance and to be led to that point by PowerINSPECT during the measurement is very valuable.  “This is particularly beneficial with hand-held devices, as it guarantees consistent and repeatable measurements.”


Work on inspection cubes depends on being able to work as flexibly as possible, yet at the same time in a reproducible way with a three-axis CMM.  “Test cubes are reference models that simulate the body in white.  Subsequent parts that occur in different car types can be built in or attached to them,” explained Herr Große-Beilage.  “So you can test in advance, whether they truly fit or check that there are no interfering edges and also if joints and radii are correct.  Every manufacturer has different reporting standards but we can implement them really quickly with PowerINSPECT.”


For further information on Delcam’s PowerINSPECT software, please contact:-

Peter Dickin, Marketing Manager

Direct phone: 44 (0)121 683 1081                  e-mail:


Delcam Ltd

Small Heath Business Park,

Birmingham, B10 0HJ, UK




© 2024 Gauge and Tool Makers Association (GTMA Ltd) Registered in England, no. 12468142
Manufacturing Resource Centre, Adams Way, Alcester, Warwickshire, B49 6PU