GF Machining Solutions Intro to EDM Technology 2nd May, 2018

Estimated reading time 2 minutes

[vc_row][vc_column][vc_column_text]Introduction to EDM Technology Electrical Discharge Machining is a widely used process including die-sinking EDM, wire-cutting EDM and hole drilling EDM. EDM can be used to machine conductive materials (steel or titanium), for example — of any hardness to an accuracy of up to one-thousandth of a millimeter with no mechanical action. These properties make EDM an essential mould and tool making technology. We are pleased to invite you to our ‘New to EDM Morning’ at GF Machining Solutions, in Coventry on Wednesday 2nd May 2018 from 09.30 – 13.30 Wednesday 2nd May 2018 09:30 - 13:30 Agenda 09:30 – 09:45 –  Registration + Coffee 09:45 – 10:00 – Welcome / Introduction to GF  (Martin Spencer)
  • 10:00 – 10.45 – GF MS Wire EDM Introduction (Mark Lasseter)
  • What is EDM (Introduction to the spark process)
  • Wire EDM Products (CUT E, CUT P, CUT X Solutions)
  • Wire Applications (General engineering, mould and press tools, Aerospace segments)
10.45 – 11.00 – Coffee Break 11.00 – 11.30 – GF MS Spark Erosion Introduction (Mark Lasseter)
  • GFMS Die Sink Products (FORM E, FORM P, FORM X Solutions)
  • Die Sink Applications (Mould Tools and General Engineering)
11.30 – 12.00 – System 3R – Tooling and Automation Solutions 12.00– 13.00 – Live Demonstrations on GF MS EDM Technology (CUT P - complex punch, FORM P - Deep rib erosion) 13.00 – 13.30 – Lunch / Discussions with specialists 13.30 – Finish[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]For further information please contact Shireen Khanum on 02476 538691 [/vc_column_text][/vc_column][/vc_row]
© 2024 Gauge and Tool Makers Association (GTMA Ltd) Registered in England, no. 12468142
Manufacturing Resource Centre, Adams Way, Alcester, Warwickshire, B49 6PU